For what reason is a digital scale reset or you might want to reset it?
We know that scales are the oldest weighing instruments known to man, where their initial appearance had to do with weight comparison, where the first models were analog and currently came to change with the birth of digital technology, improving their designs, reading and reliability.
And, although most people know how to use a digital scale, very few people know how to calibrate them, reset them or access their factory settings. Although we already know that digital scales are used in different applications (warehouses to weigh inputs and raw material received, food processes to weigh their products in process or finished, laboratories to accurately measure ingredients and components, and so on), each is configured differently. But it is important to know about digital scales before implementing them as much as we can, in order to get the most out of these measuring instruments.
However, for most measuring instruments the procedure is similar. First, when we are going to put a digital scale into operation what you do at the beginning is to turn it on by pressing the power button, this allows the electrical energy to be from the batteries or through the direct connection to the current system to flow through the system and activate the scale.
During the time of power-on, the scale will begin to configure its parameters and will take all the weight that is on your plate as a dead weight, so even though an anvil is on top of the plate, it will turn on marking a weight of zero.
This is the same that happens when the “power” or “zero” button is pressed, because it has the function of setting the tare. So each time this button is pressed the scale will be zeroed (this happens if and only if the button is pressed for a short moment, since if the button is kept pressed the scale will turn off instead of zero). Learn more about digital scales by clicking here.
On the other hand, if the scale is turned on with nothing on its measuring plates, the scale will turn on correctly, mark its counter at zero, and when placing the container or object to be measured, the actual weight of what is being measured will be obtained.
Performing this process of zeroing the scale is what is known as restarting it, because each time we place an object on the plate of the digital scale and press the button, it will take that weight and leave it configured within its parameters such as the new zero weight or its tare weight.
Of course, there are other types of reset for digital scales, however for this, another series of steps must be performed, and it is not in the same way, although before performing another type of reset or wanting to verify the scale system, it is advisable to take into account the following:
- Before turning on the digital scales, they must be done without objects of any kind on it.
- The button to set the digital scale to zero is normally the power button, but it can have various names such as “zero”, “tare” or “reset”.
- Most digital scales are factory set to auto shut off after a period of inactivity.
- When performing repetitive weighing processes, it is recommended to press the reset button before each weighing to see the match.
- And finally, the most important thing to keep in mind is that restarting a digital scale does not ensure the calibration and accuracy of the measuring instrument.
Learn more about digital scales, industrial scales and laboratory scales, all of which are manufactured by Radwag, and are offered by its authorized dealer First Technology. Our equipment is verified and manufactured following ISO:9001 standards, thus guaranteeing the most reliable measurements.